 Ø16mm (min) – Ø630(max) working range
With three palette
Controlled by servo motors
Production speed 0 – 30 m./min
Ability to adjusting articulated Pneumatic level at two point of above palette
Ability to adjusting diameter at center of below palette by motor
Ability to adjusting pressure power of above palette by sensitive pressure check
Paletts have been made synchronized working due to impulsion of a servo motor for each palette. Therefore; palettes have been protected sliding from surface of the pipe and also, Pulling power has been diffused surrounding of pipe homogeneously.
Facility of transition from Pilot pipe to Line pipe is made by adjusting level by supporting two pneumatic cylinders by impulsion at two site of above palette.
PIPE PULLER :
| TYPE |
SCK - 63 |
SCK - 160 |
SCK - 250 |
SCK - 500 |
SCK - 630 |
| WORKING RANGE ( Ø mm.) |
16 - 63 |
32 - 160 |
110 - 250 |
160 - 500 |
250 - 630 |
| SURROUNDING PALETTE NUMBER |
2 |
3 |
4 |
6 |
6 |
| MOTOR POWER ( Kw ) |
2,2 |
3 |
4 |
5 |
7,5 |
| MAX. PULLING SPEED ( Mt / s ) |
30 |
20 |
12 |
5 |
5 |
| MAX. PULLING POWER ( Newton ) |
9.000 |
22.000 |
28.000 |
65.000 |
80.000 |
|
AUTO DUCT FORMING MACHINE
